I always wanted to add hydro assist to my Jeep but questioned the PSC kit’s price point. Being a simple system I figured others would work just as well or better. Enter Redneck Ram from West Texas Offroad.
I found myself once again calling my buddy Dirk to help lend his expertise with this somewhat complicated install.
This was a two day install, as we could only work nights.
First things first, we put the Jeep on the lift, removed the front driver tire/wheel, tie rod, and sway bar links. We also removed the pitman arm from the drag link (leaving the passenger side connected).
Continue reading Product Install: Redneck Ram Hydro Assist Kit + Synergy Sector Shaft Brace →
Like this:
Like Loading...
Today with friends Chad and Dirk, we installed a Synergy Tie Rod and Sector Shaft brace kit into Chad’s 2007 Jeep JK. This was a great project, so I decided to do an install on it, hopefully to help any other Jeepers with their own future installs.
- Remove factory components: We ended up removing the track bar, sway bar links, driver’s side coil, and drag link. We also removed the driver’s side shock, to help with coil removal.
2. Remove the four factory bolts that hold the steering box in place. Be sure to leave one barely threaded, or have a friend ready to catch and hold the steering box! These are the only bolts holding it in place. Remove the pitman arm nut (keep the washer handy!).
Continue reading Product Install: Synergy Sector Shaft Brace Kit →
Like this:
Like Loading...
Not all vegans drive hybrids and wear skinny jeans.
Off-road Vegan 